Compare

Archive · Cannondale · CAAD

Cannondale CAAD9 BB30 Cyclocross 2010

Archive model 2010. Probably no longer sold new. I only have the frame geometry, not the build.

I’m buying or selling this bike ↓

Geometry ?

Cannondale CAAD9 BB30 Cyclocross geometry for model year 2010. Model years are approximate: manufacturers rarely say exactly when the geometry changed.

Size47505254565860
Stack536547559565572591610
Reach365364372381395409408
Head angle70.5°71°71.5°72°72.5°72.5°72.5°
Head tube130140150155160180200
Seat angle74.5°74°73.5°73.5°73°73°72.5°
Top tube (effective)520525540550570590600
Seat tube470500520540560580600
Chainstay432432432432432432432
Wheelbase1005100510111017102810481053
BB drop67676767676767
Fork offset45454545454545
Trail75726966626262
Standover774793808820832851870

Geometry source: vintagecannondale.com

Bike from a listing

Buying this bike second-hand? Enter the size, stem and spacers actually on the bike to see whether it fits you.

Selling it? Fill in the details and paste the link into your listing. Buyers will see where the bars end up, based on what you enter.

How do I measure it?

Cover + spacers: measure from the top of the head tube to the underside of the stem. That’s the headset cover plus any spacers. Length and angle are usually printed on the stem (−6° is typical, with the stem pointing down). Bar reach is on the bar manufacturer’s website. If you can’t find it, leave it at 75 mm. Spacers above the stem show how much higher the stem could still go. Leave that blank and I’ll assume it can’t go any higher.

Is it an integrated cockpit, a one-piece bar and stem? Then the stem may not be swappable. Check with the seller.

Do you ride it? Enter it as your position.