Compare

Archive · Cannondale · SuperSix

Cannondale SuperSix EVO 2018–2019

Archive model 2018–2019. Probably no longer sold new. I only have the frame geometry, not the build.

I’m buying or selling this bike ↓

Geometry ?

Cannondale SuperSix EVO geometry for model years 2018, 2019. Model years are approximate: manufacturers rarely say exactly when the geometry changed.

Size444850525456586063
Stack514516526536551567584603626
Reach362369375381387393399405411
Head angle70.5°71.5°72°72.6°72.9°73.1°73.2°73.3°73.4°
Head tube107107115125139155175195219
Seat angle75°74.7°74.4°74.1°73.8°73.5°73.2°72.9°72.6°
Top tube (effective)500510522534547561575591607
Seat tube465487512538559576594615642
Chainstay405405405405405405405407409
Wheelbase964963967972980989100010131027
BB drop747474717171696969
Fork offset454545454545454545
Trail736663595856565554
Standover716740755775791807826846870

Geometry source: cannondale.com

Current successor: Cannondale SuperSix EVO (gen 4) (2023), Cannondale SuperSix EVO (gen 5) (2026)

Bike from a listing

Buying this bike second-hand? Enter the size, stem and spacers actually on the bike to see whether it fits you.

Selling it? Fill in the details and paste the link into your listing. Buyers will see where the bars end up, based on what you enter.

How do I measure it?

Cover + spacers: measure from the top of the head tube to the underside of the stem. That’s the headset cover plus any spacers. Length and angle are usually printed on the stem (−6° is typical, with the stem pointing down). Bar reach is on the bar manufacturer’s website. If you can’t find it, leave it at 75 mm. Spacers above the stem show how much higher the stem could still go. Leave that blank and I’ll assume it can’t go any higher.

Is it an integrated cockpit, a one-piece bar and stem? Then the stem may not be swappable. Check with the seller.

Do you ride it? Enter it as your position.