Compare

Archive · Fuji · SL

Fuji SL 2.1 Disc 2018–2021

Archive model 2018–2021. Probably no longer sold new. I only have the frame geometry, not the build.

I’m buying or selling this bike ↓

Geometry ?

Fuji SL 2.1 Disc geometry for model years 2018, 2019, 2020, 2021. Model years are approximate: manufacturers rarely say exactly when the geometry changed.

SizeXXSXSSMLXLXXL
Stack497499520540559580598
Reach372377378385389403417
Head angle71°71.5°71.5°73°73°73°73°
Head tube100100120135155175195
Seat angle75°74.5°73.8°73.5°73°73°73°
Top tube (effective)505515530545560580600
Seat tube (c-t)420450480500520540570
Chainstay410410410410410410410
Wheelbase97998097997898310091029
BB drop68686868686868
Fork offset52525243434343
Trail60.757.657.657.857.857.857.8
Standover707718743762782801825

Geometry source: web.archive.org

Bike from a listing

Buying this bike second-hand? Enter the size, stem and spacers actually on the bike to see whether it fits you.

Selling it? Fill in the details and paste the link into your listing. Buyers will see where the bars end up, based on what you enter.

How do I measure it?

Cover + spacers: measure from the top of the head tube to the underside of the stem. That’s the headset cover plus any spacers. Length and angle are usually printed on the stem (−6° is typical, with the stem pointing down). Bar reach is on the bar manufacturer’s website. If you can’t find it, leave it at 75 mm. Spacers above the stem show how much higher the stem could still go. Leave that blank and I’ll assume it can’t go any higher.

Is it an integrated cockpit, a one-piece bar and stem? Then the stem may not be swappable. Check with the seller.

Do you ride it? Enter it as your position.