Compare

Archive · Trek · Émonda

Trek Emonda SL 2018–2019

Archive model 2018–2019. Probably no longer sold new. I only have the frame geometry, not the build.

I’m buying or selling this bike ↓

Geometry ?

Trek Emonda SL geometry for model years 2018, 2019. Model years are approximate: manufacturers rarely say exactly when the geometry changed.

Size50cm52cm54cm56cm58cm60cm62cm64cm
Stack535547555577596615634654
Reach374379381387391395398401
Head angle72.1°72.8°73°73.5°73.8°73.9°73.9°74°
Head tube130140155170190210230250
Seat angle74.6°74.2°73.7°73.3°73°72.8°72.5°72.3°
Top tube (effective)521534543560573586598610
Seat tube476493506533553573593613
Chainstay410410410410411411412413
Wheelbase974977981983992100110101018
BB drop7272707068686868
Fork offset4545454040404040
Trail6157565856565555
Standover707729742767786804822841

Geometry source: trekbikes.com

Current successor: Trek Madone (gen 8, SLR / SL) (2025)

Bike from a listing

Buying this bike second-hand? Enter the size, stem and spacers actually on the bike to see whether it fits you.

Selling it? Fill in the details and paste the link into your listing. Buyers will see where the bars end up, based on what you enter.

How do I measure it?

Cover + spacers: measure from the top of the head tube to the underside of the stem. That’s the headset cover plus any spacers. Length and angle are usually printed on the stem (−6° is typical, with the stem pointing down). Bar reach is on the bar manufacturer’s website. If you can’t find it, leave it at 75 mm. Spacers above the stem show how much higher the stem could still go. Leave that blank and I’ll assume it can’t go any higher.

Is it an integrated cockpit, a one-piece bar and stem? Then the stem may not be swappable. Check with the seller.

Do you ride it? Enter it as your position.