Compare

Archive · Trek · Madone

Trek Madone H2 Fit 2011–2013

Archive model 2011–2013. Probably no longer sold new. I only have the frame geometry, not the build.

I’m buying or selling this bike ↓

Geometry ?

Trek Madone H2 Fit geometry for model years 2011, 2012, 2013. Model years are approximate: manufacturers rarely say exactly when the geometry changed.

Size43cm47cm50cm52cm54cm56cm58cm60cm62cm64cm
Stack485522535547555577596615634654
Reach359369374379381387391395398401
Head angle71.4°71.2°72.1°72.8°73°73.5°73.8°73.9°73.9°74°
Head tube124120130140150170190210230250
Seat angle75.5°74.6°74.6°74.2°73.7°73.3°73°72.8°72.5°72.3°
Top tube (effective)485513521534543560573586598610
Seat tube406444476493506533553573593613
Chainstay410410410410410410411411412413
Wheelbase954974974977981983992100110101018
BB drop52727272707068686868
Fork offset40454545454040404040
Trail64676157565856565555
Standover663698707729742767786804822841

Geometry source: ukrbike.com.ua

Bike from a listing

Buying this bike second-hand? Enter the size, stem and spacers actually on the bike to see whether it fits you.

Selling it? Fill in the details and paste the link into your listing. Buyers will see where the bars end up, based on what you enter.

How do I measure it?

Cover + spacers: measure from the top of the head tube to the underside of the stem. That’s the headset cover plus any spacers. Length and angle are usually printed on the stem (−6° is typical, with the stem pointing down). Bar reach is on the bar manufacturer’s website. If you can’t find it, leave it at 75 mm. Spacers above the stem show how much higher the stem could still go. Leave that blank and I’ll assume it can’t go any higher.

Is it an integrated cockpit, a one-piece bar and stem? Then the stem may not be swappable. Check with the seller.

Do you ride it? Enter it as your position.